- 1 Product description of Jotun SeaForce 90 Anti-fouling
- 1.1 Typical use of Jotun SeaForce 90 Anti-fouling
- 1.2 Approvals and certificates
- 1.3 Film thickness per coat
- 1.4 Guiding data for airless spray
Product description of Jotun SeaForce 90 Anti-fouling
Jotun SeaForce 90 Anti-fouling is a one component acrylic, hydrolysing antifouling coating based on ion exchange technology. It provides very good fouling protection and improved hull performance. This is achieved through self polishing characteristics reducing hull deterioration, friction and speed loss. To be used as finish coat in immersed environments only. Suitable on approved primers and tie coats on aluminium and carbon steel substrates. It can be applied at sub zero surface temperatures.
- Coastal AF 38 Anti-Fouling Paint
- Jotun SeaForce 60 Anti-Fouling Paint
- Jotun SeaForce 30 Anti-Fouling Paint
Typical use of Jotun SeaForce 90 Anti-fouling
Recommended for under water hull in newbuilding and drydocking. Designed as an efficient solution for vessels trading at a wide range of speed and activity. The product can be used for long service periods up to 60 months as a part of a complete coating system.
Typical trade of Jotun SeaForce 90 Anti-fouling
Suited for vessels operating in global service, including fresh water exposure during newbuilding outfitting.Recommended for deep see trade.
Approvals and certificates
Compliant with IMO Antifouling System Convention AFS/CONF/26.
Additional certificates and approvals may be available on request.
Colours of Jotun SeaForce 90 Anti-fouling
Standard : dark red, light red
made to order : blue, black, green
Film thickness per coat
Typical recommended specification range
Dry film thickness : 75 – 175 µm
Wet film thickness : 130 – 300 µm
Theoretical spreading rate : 7,7 – 3,3 m2/l
Application methods of Jotun SeaForce 90 Anti-fouling
Jotun SeaForce 90 Anti-fouling paint can be applied by
Spray : Use airless spray
Brush : May be used. Care must be taken to achieve the specified dry film thickness.
Roller : May be used. Care must be taken to achieve the specified dry film thickness.
Jotun Thinner No.7
Guiding data for airless spray
Nozzle tip (inch/1000) : 21 – 31
Pressure at nozzle (minium): 150 bar/210 psi
For maximum overcoating intervals, refer to the Application Guide (AG) for this product.
When three or more antifouling coats are applied in rapid succession it is recommended to double the time for immersion.
Drying and curing times are determined under controlled temperatures and relative humidity below 85%, and at average of the DTF range for the product.
Surface (touch) dry : The state of drying when slight pressure with a finger does not leave an imprint or reveal tackiness.
Dry to over coat, minium : The recommended shortest time before the next coat can be applied.
Dried/Cured for immersion : Minium time before the coating can be permanently immersed in sea water.
Recommended type of primer
Anticorrosive primer system suitable for purpose.Recommended tie coat for the subsequent antifouling coat is :
Safeguard Universal ES
Technical Data Sheet SeaForce 90
The volume stated is for factory made colours. Note that local variants in pack size and filled volumes can vary due to local regulations.
The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well ventilated space and away from source of heat and ignition. Containers must be kept tightly closed. Handle with care.
Shelf life at 23oC
SeaForce 90 : 18 month(s)
For other colours than red, the shelf life is 6 months
In some markets commercial shelf life can be dictated shorter by local legislation. The above is minimum shelf life, thereafter the paint quality is subject to re-inspection.
This product is for professional use only. The applicators and operators shall be trained, experienced and have the capability and equipment to mix/stir and apply the coatings correctly and according to Jotun’s technical documentation. Applicators and operators shall use appropriate personal protection equipment when using this product. This guideline is given based on the current knowledge of the product. Any suggested deviation to suit the site conditions shall be forwarded to the responsible Jotun representative for approval before commencing the work.
Healthy and safety
Please observe the precautionary notices displayed on the container. Use under well ventilated conditions. Do not inhale spray mist. Avoid skin contact. Spillage on the skin should immediately be removed with suitable cleaner, soap and water. Eyes should be well flushed with water and medical attention sought immediately
Colour variation of Jotun SeaForce 90 Anti-fouling
When applicable, products primarily meant for use as primers or antifoulings may have slight colour variations from batch to batch. Such products may fade and chalk when exposed to sunlight and weathering.
The information in this document is given to the best of Jotun’s knowledge, based on laboratory testing and practical experience. Jotun’s products are considered as semi-finished goods and as such, products are often used under conditions beyond Jotun’s control.Jotun cannot guarantee anything but the quality of the product itself. Minor product variations may be implemented in order to comply with local requirements. Jotun reserves the right to change the given data without further notice.
Users should always consult Jotun for specific guidance on the general suitability of this product for their needs and specific application practices.
If there is any inconsistency between different language issues of this document, the English (United Kingdom) version will prevail.
KIM LOAN CONSTRUCTION TRADING SERVICE CO., LTD
we specialize in manufacturing, distributing and applying epoxy paints
Address : No.147, Road 28, Ward 6, Go Vap District, Ho Chi Minh City